|
 Quick Cure Or Slow Rise
FROTH-PAK Two-Component Foam is a chemically cured foam system. Two-component foam systems consist of an “A” component and a “B” component. These two components mix in the nozzle of the dispensing unit, and the resulting foam cures much more quickly than one-component foams. FROTH-PAK Two-component Foams are available in a variety of densities. Froth-Pak® Two-Component Foams expand at a ration of 8:1 and carries an R-Value of 6 to 7 per inch (2.54cm).
Quick Cure FROTH-PAK Two-Component Foam is tack free in less than 60 seconds and cures completely in 2-5 minutes. Cured foam can be trimmed, sanded and/or painted.
Typical Quick Cure applications include:
- Spraying underside of slate tiles, to hold tiles in place, to help insulation, to water proof and stop condensation
- Spraying between stud walls, for insulation and sound proofing.
- Spraying wood or metal sheds for insulation and stopping condensation.
- New build or renovation of old properties. (Barn Conversions)
- Insulating commercial & residential construction
- Filling openings in boats & trailers
- Insulating spas & hot tubs
- Insulating transportation trailers
- Large surface coverage and large voids
- Loft and/or Roof insulation
FROTH-PAK SR Slow Rise is a multi-purpose slow-rise polyurethane foam. It is formulated to slowly rise and fill, insulating large enclosed spaces and blind cavities. Froth-Pak® SR Foam is a two-component poured-in-place foam that cures tack-free in 60 to 90 seconds.
To help fill cavities and hard to reach areas, you can attach a clear plastic extension hose to the tip of the nozzle.
Typical Slow Rise applications include:
- Insulating refrigerated trailer floors and walls
- Sound and noise reduction in walls
- Filling openings in boats and pontoons
- Filling blind cavities and narrow openings
|
