Ideal for small areas and/or repair work

Foam Kit 15 Use Guidelines:

ALWAYS review and follow the directions provided in your foam kit. The below instructions are a general overview, meant to accompany the reference photos. ENSURE you follow all safety precautions including wearing protective eyewear and gloves.

• Foam Kit 15 Assembly Instructions: (See Tumbnail Pictures)

• Tear open the back of the box

• Without forcing, remove hoses and applicator to full length

• Ensure gun safety is ON (roller is locked toward end of applicator)

• Pull yellow tab to remove black plastic valve lock. Discard.

• Activate valves by pulling black strap up and insert strap into slit (marked in yellow) on back of box. Hoses will partially fill with chemicals

.

• Hold unit UPSIDE DOWN, move roller to “ON” position (towards hoses) and dispense foam. Adjust roller to increase/decrease flow.

• If dispensing is stopped for more than 30 seconds, replace nozzle with the extra provided.

• Foam can be trimmed, painted, sanded or plastered after curing completely.